HP AA HP Netserver 4000 Reference Guide

Ch 6: Backp and Restore
Network Server Division
6-9
• The CE and the two IOPs are configured as three individual
backup clients.
• The dedicated IOP and CE network cards are configured as
below.
1. Install the new NIC cards and add the NIC adapter driver.
2. Next, configure adapter bindings as follows:
• IL Network Adapter
Enable – NetBEUI Protocol
Disable – TCP/IP Protocol
Disable – Wins Client (TCP/IP)
Enable – Marathon Datagram Services
Disable – Marathon Ethernet Provider
Enable – MTCEtx driver
• Original Adapter (for default CE communication)
Disable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
• Marathon MtcVnP Virtual Adapter
Enable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Disable - Marathon Datagram Services
Disable - Marathon Ethernet Provider
Disable - MTCEtx driver
• New Network Adapter (for dedicated IOP communication to CE)
Disable - NetBEUI Protocol
Enable - TCP/IP Protocol
Enable - Wins Client (TCP/IP)