HP AA HP Netserver 4000 Reference Guide

HP NetServer AA
Hewlett-Packard Company
6-10
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
• New Network Adapter (for dedicated backup CE network)
Disable - NetBEUI Protocol
Disable - TCP/IP Protocol
Disable - Wins Client (TCP/IP)
Enable - Marathon Datagram Services
Enable - Marathon Ethernet Provider
Disable - MTCEtx driver
3. Configure a unique IP address for each dedicated IOP NIC.
4. For dedicated backup CE NIC (one in each IOP because
mirrored for AA), use the Marathon manager in IOP1 and IOP2
to configure a second NIC into the CE.
5. Go into CE network properties and add an additional Marathon
MTCETHR Virtual Adapter.
6. Set up a separate IP address (different than original CE user IP)
for the dedicated backup network. The dedicated backup
network with IOP1, IOP2, CE1 and CE2 backup NICs should be
on a private switch or a backup network separate from normal
user traffic network.
7. Reboot the HP AA system
8. Check that you can ping the each dedicated IOP IP addresses
from the CE. Then check that you can ping each of the CE IP
addresses from each IOP.