HP AA HP Netserver 4000 Reference Guide

HP NetServer AA
Hewlett-Packard Company
2-16
Using One Monitor
Using two monitors is not practical, especially in a rack mount
environment. One monitor cabled to a console switch allows for the
viewing of any of the four servers. The SSDL video switch is still
used, so there are essentially two switches that have to be used in
conjunction with each other. To view any of the servers:
1. Use the HP console switch to choose one of the Tuples by hitting
the PrintScreen Button and selecting Port 1 for Tuple 1 and Port
2 for Tuple 2. (If the Ports are not labeled on the HP console
switch, take the time to label them using the F2 advanced menu
to avoid later confusion.)
2. Use the SSDL video switch for the chosen Tuple to switch from
CE and IOP.
Keyboard and Mouse Control
When the CE is booted, the AA 4000 software automatically moves
keyboard and mouse control away from the IOP to the CE. This is
another example of device redirection. Looking at the Marathon
Manager Utility will show the status of the redirection of the
keyboard and mouse. When the keyboard is green it is under control
of the CE, when it is white it is under the control of the IOP. To
change control between the CE and IOP, press <CTRL> <SHIFT>
<F12>; the key sequence will allow the user to regain control of the
keyboard and mouse.
Just like the choice to use one monitor or two, there is also a choice
of using one set of a keyboard and mouse or two depending on if the
HP Console Switch is used.
No HP Console Switch
In the diagram that shows the array using two monitors, notice there
is also two keyboard and two mice. When the array is booted
keyboard and mouse control are automatically passed to the CEs. To
perform an operation on the CE, simply choose one of the keyboards.
It makes no difference which one since both of them control the CEs
and any keyboard or mouse movement on one CE will instantly
appear on the other CE due to being in lockstep.
Using the HP Console Switch
To use the keyboard and mouse on a specific NetServer, press the
PrintScreen key to bring up the Console Switch menu, choose Port 1
for Tuple 1 or Port 2 for Tuple 2. Most of the time the screen that
will appear will be the CE and it will have keyboard control. If it is
the IOP that needs to be accessed, press the video switch on the