HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 5 Commands

CE_O/S Shutdown Command

This command performs a shutdown on the CE operating system.

Command CE_O/S Shutdown Operation From IOPx

Console Syntax MTCCONS CE_O/S Shutdown Operation From IOPx

Variables

x – the ID number of the IOP (1 or 2)

Results The monitor on the specified IOP issues a request to the CE Endurance

System Manager service to shut down the operating system. The CE

Endurance System Manager service initiates the system shutdown. The

operating system reboots when the CE(s) becomes available, as defined by

the CE Auto Boot and Auto Synch parameters.

To verify that the CE operating system completes shutdown, from either IOP:

• Check the status of the server in the Endurance Manager Main window.

• Issue an IOPn.Monitor Show Configuration command from either IOP to

make sure that the CE operating system is offline.

• Check the Windows NT Event Viewer for a message that indicates that

the CE operating system has been shut down, disabled, or removed from

service.