HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 5 Commands

IOP Shutdown Operation

This command removes the specified IOP from the configuration, shuts down the IOP, and

automatically reboots it. When it reboots, the IOP rejoins the server configuration. If you do not

want the IOP to rejoin, power it off or use the IOP Disable command.

Command IOPn Shutdown Operation From IOPx

Console Syntax MTCCONS IOPn Shutdown Operation From IOPx

-disable_safeguard

Note: The -disable_safeguard argument is needed only for the last IOP

online or for the CE boot disk if the CE is running.

Variables n – the ID number of the IOP (1 or 2) to shut down

x – the ID number of the IOP (1 or 2) that issues the shutdown command

Results Check the Windows NT Event Viewer for a message that indicates that the

CE has been shut down, disabled, or removed from service.