HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

167
Chapter 6 Configuration Utility
You can use the icons and buttons in this window to add, remove (delete), and display devices
in your configuration. The icons in this window are described in Figure 6-1; the buttons are
described in Table 6-2. For more detailed information about Endurance Configuration Utility
windows and dialog boxes, refer to the utility’s online help.
Warning: The configuration information must be identical on both IOPs. If
you add or remove any hardware devices from your
configuration, you must make the same change on each IOP.
Table 6-1 Endurance Configuration Utility Devices and Icons
Device Description
CD ROM Drives CD-ROMs are non-mirrored and can be either SCSI CD-ROM
drives or IDE CD-ROM drives.
Note: There are certain requirements for the use of redirected IDE
CD-ROM drives. Refer to page 19 in the HP NetServer AA
Solution Installation Guide or more information about
configuring IDE-CD-ROMs.
Disk Drives
Non-mirrored
Mirrored
All disk drives are either non-mirrored or mirrored SCSI disk
drives. You must identify the CE boot disk.
Floppy Drives All floppy drives are non-mirrored floppy drives.
Network Adapters Network adapters must be identical Ethernet adapters that are
configured in pairs.
Serial Ports All serial ports are non-mirrored serial (COM) ports.
Tape Drives All tape drives are non-mirrored SCSI tape drives.