HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 6 Configuration Utility
170
Using the Endurance Configuration Utility
Using this window, you can:
• Display Device Properties
• Add Devices
• Remove Devices
• Designate a Boot Disk
• Commit Configuration Changes
Warning: The configuration information must be identical on both IOPs.
If you add or remove any hardware devices from your
configuration, you must make the same change on each IOP.
Display Device Properties
To display the properties of an existing hardware device:
Step Action Notes
1 Click on the device. For example, it might be CE.Disk0.
2Click Properties. The Properties dialog box displays the information
for the device. Refer to the online help for specific
device property information.