HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 6 Configuration Utility
172
Designate a Boot Disk
For each server, you must designate a boot disk for the CE(s); the boot disk must be a mirrored
disk. After you add the mirrored disks to your configuration, designate the boot disk as follows:
Change CE Ethernet Adapters Properties
If you need to change information for a CE Ethernet adapter (because you initially entered
incorrect information or because you replaced an adapter):
Step Action Notes
1 Select the disk that you want to be the CE
boot disk.
For example, it might be CE.Disk0.
2 Choose Properties.
3Click on the Boot Device check box so that
it contains a check mark.
4Click OK.
5 Complete your configuration changes
following the steps in Commit
Configuration Changes on page 173.
Step Action
1 Select and Remove (delete) the Ethernet adapter that is currently defined.
2 Add a new Ethernet adapter with the appropriate settings.
3 Complete your configuration changes following the steps in the Commit Configuration Changes
section on page 173.