HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 7 Tools and Utilities
192
MTCEINFO Tool
The MTCEINFO Tool is an application that displays Ethernet adapter information. You can use
this tool from any computer to view information about its local Ethernet adapter. You may need
to access this information to:
• Verify that the adapter is operating properly.
• Verify that the adapter is receiving network traffic.
The output displayed as a result of the MTCEINFO Tool includes the adapter description,
counters, and error information. The information displayed is adapter specific and depends on
the NDIS query options supported by the adapter. In general, statistics stored on the adapter are
only reset when the system is power cycled or reset.
Running MTCEINFO
To run MTCEINFO:
Step Action Notes
1 Open either the Endurance Console window or
an MS-DOS window.
2 Type mtceinfo ServiceName. ServiceName is the Ethernet device name with a
number appended.
To access the
ServiceName:
• On a CE, use mtcethrX
• On an IOP, use either:
- mtccfg -netinfo
- Check the Windows NT Registry
parameter under
HKEY_LOCAL_MACHINE\
SOFTWARE\Microsoft\Windows
NT\CurrentVersion\NetworkCards\
x\ ServiceName
For example:
For an adapter installed as network
# 2 with the ServiceName E100B, you would
type the following at the MS-DOS prompt:
mtceinfo E100B2.
X is the number of the redirected Ethernet
connection.
X is a number from 1 to the number of NICs
installed.