HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

197
Chapter 7 Tools and Utilities
Table 7-5 summarizes the MTCCONS commands.
Note: The -disable_safeguard argument may be required for particular commands that
disable or shut down server elements, depending on your configuration. Refer to
the command descriptions to determine whether this argument is required.
Table 7-5 Summary of MTCCONS Commands
MTCCONS Command Page
MTCCONS CEn Disable Auto Boot From IOPx 80
MTCCONS CEn Disable Auto Synch From IOPx 81
MTCCONS CEn Enable Operation From IOPx 82
MTCCONS CEn Enable Auto Boot From IOPx 83
MTCCONS CEn Enable Auto Synch From IOPx 83
MTCCONS CE_O/S Shutdown Operation From IOPx 89
MTCCONS ESIn Enable Operation From IOPx 90
MTCCONS IL12 Enable Operation From IOPx 91
MTCCONS IOPn Disable Operation From IOPx -disable_safeguard 82
MTCCONS IOPn Enable Operation From IOPx 94
MTCCONS IOPn Shutdown Operation From IOPx -disable_safeguard 95
MTCCONS IOPn.DatagramService Reset Port Counters 97
MTCCONS IOPn.DatagramService Show Parameter Values 98
MTCCONS IOPn.DatagramService Show Port Counters 99
MTCCONS IOPn.DatagramService Show Port Information 101
MTCCONS IOPn.Diskx Disable Bad Block Remap 103
MTCCONS IOPn.Diskx Disable Mirrored Disk 104
MTCCONS IOPn.Diskx Enable Bad Block Remap 105
MTCCONS IOPn.Diskx Enable Mirrored Disk 107
MTCCONS IOPn.Diskx Reset HP NetServer AA Partition 108
MTCCONS IOPn.Diskx Reset Mirror Copy 109
MTCCONS IOPn.Dsl Show Configuration 111