HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

203
Chapter 8 Managing Faults
Diagnosing Faults
You can use any of the methods in Table 8-1 to diagnose a fault.
If you are monitoring a server using Remote Endurance Manager, you have access only to
Endurance Manager and Windows NT Event Viewer information.
Table 8-1 Diagnosing Faults
Method Description Refer to . . .
Endurance Manager Use the Administration Window and Device Status Window to
determine if a component, including the MIC, is active or online.
Chapter 4 for
Endurance
Manager
information
MIC status lights Displays the power and connection status for the MICs in your
server.
Appendix A for
MIC status light
information
Windows NT Event
Viewer
Displays all events reported to the Windows NT operating
system, including events. Use this log to diagnose potential
faults.
HP NetServer AA
Solution Messages
online manual for
event information
Endurance Event Log
Utility
Displays events as they are being logged. The Event Log
(MTCLOG) is an MS-DOS application that displays only
Endurance events as they occur.
Chapter 7 for
MTCLOG
information
HP NetServer AA
Solution Messages
online manual for
event information