HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

215
Chapter 9 Maintenance
Replacing an Interconnect Fiber Cable
To replace an interconnect fiber cable:
Replacing an Interconnect Fiber Cable on an Online System
Use the following procedure to replace an interconnect fiber cable on an online system.
Caution: Before proceeding, make sure you are properly grounded using, for instance, a
wrist strap with an attached alligator clip that is connected to an appropriate
ground.
Step Action
1 Obtain a replacement interconnect fiber cable from your service provider.
2 Using Table 9-1 as a guideline, identify the fiber cable to be replaced.
Table 9-1 Interconnect Fiber Cable Chart
Fiber cable between...
Affects this HP NetServer
AA path
Affects these components
IOP1 to CE1 ESI11 IOP1 and CE1
IOP1 to CE2 ESI12 IOP1 and CE2
IOP2 to CE1 ESI21 IOP2 and CE1
IOP2 to CE2 ESI22 IOP2 and CE2
Step Action Notes
1 Make sure a component at one end of the
cable to be replaced is offline or disabled.
2 Disconnect the existing cable from the
system.
3 Connect the replacement cable to the
system.