HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

219
Chapter 9 Maintenance
6 Make sure that any components affected by
this procedure are active or online.
Reenable any faulted or disabled
components (page 241).
Use Endurance Manager for this step.
7 Confirm that the new Ethernet cable
operates properly:
• Establish a network connection to
validate that the connection is
operating properly.
• Issue an Endurance Manager
Disable
IOPy.Ethernet
command.
• Issue an Endurance Manager
Enable
IOPy.Ethernet
command for the
Ethernet connection disabled in the
previous step.
• Using the Endurance Manager main
window, confirm that the Ethernet
connection that uses the replacement
cable is active and primary.
Use Endurance Manager for these steps.
For example, use Windows NT Explorer to connect
to a network node. Copy some files to and from the
server during the following steps.
This disables the Ethernet connection that
maintained network connectivity while you
completed the previous steps.
It appears bright green.
If the Ethernet connection supported by the
replacement cable remains active and primary, the
cable that you replaced is fully operational.
Step Action Notes