HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

225
Chapter 9 Maintenance
Note: For detailed instructions, refer to the HP NetServer AA Solution Installation
Guide.
Step Action Notes
1 If required, fasten the rackmount brackets
and install the IOP in the rack.
2 Attach the following cables to the IOP:
• The power cord.
• The MIC cable.
• The Ethernet cable that connects the IOP
to the public Ethernet network.
• The IL cable.
• The video cable, the keyboard, and the
mouse.
3 Plug in the power cord.
4 Power up the new IOP.
5 If you installed the IOP boot disk from the
IOP that you replaced, continue with Step 6.
Otherwise, install Windows NT and Endurance
software as described in Chapter 3 of the HP NetServer
AA Solution Installation Guide. This includes:
• Installing Windows NT.
• Installing Endurance software only for this IOP.
• Using the Endurance Configuration Utility to make
any appropriate changes to the configuration. If the
configuration has changes, you must update the
configuration on both IOPs. Refer to Chapter 6 for
information.