HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 9 Maintenance
226
6 Reboot the new IOP into Operational
Endurance I/O Processor Mode.
The public Ethernets may require additional
considerations. Refer to the procedures on page 229 for
information.
7 Use Endurance Manager to ensure that:
• Any components affected by this
procedure are active or online. Reenable
any faulted or disabled components
(page 241).
• The IOP joins the server.
• The IL transitions to active.
• The IOPx.Ethernet transitions to standby
and all other cables transition to online.
• A mirror copy is either started or
pending for all mirrored devices.
• After all mirror copies are complete,
check the message log for any messages
that occurred after the IOP was replaced
and that begin with or .
Step Action Notes