HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

239
Chapter 9 Maintenance
6 Commit the changes, and exit Disk
Administrator.
The following is an example of properly partitioned disks in a
server.
7 Open the Endurance Configuration
Utility and complete the following:
• Save the current configuration
to a file.
• Remove the configuration entry
for the disk to be replaced, and
select Commit.
• Reload the configuration file
you saved when you first
opened the Configuration
Utility, and Commit the
changes.
The MTC Configuration tool must see a mirrored disk entry in
your system. For this reason, if the failed disk is your only
mirrored disk, you cannot delete its entry from the configuration
file.
• In this case, you first need to add a fake mirrored disk entry,
assigning it a substitute SCSI address (with an unused SCSI
address). For example, try 7-0-0-0. This enables you to
remove the disk entry for the disk you need to replace.
• Remove the disk entry for the disk to be replaced and select
Commit.
Step Action Notes (Continued)