HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 9 Maintenance
240
8 Reboot the IOP in Operational
Endurance I/O Processor Mode.
9 Reenable any faulted or disabled
components (page 241).
Ensure that:
• Any components affected by
this procedure are active or
online.
• The IOP joins the server.
• A mirror copy is either started
or pending for all mirrored
devices, including the disk that
previously was failed.
Use Endurance Manager for these steps.
If the CE operating was shut down before beginning this
procedure, mirror copies for other mirror sets (that do not
contain the replacement disk) may not be required.
Step Action Notes (Continued)