HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

61
Chapter 4 Endurance Manager
Display and Control Window
The Display and Control window displays the commands, options, and parameters that enable
you to manage and display information about your server.
Note: For server command information, refer to Chapter 5.
You can access the Display and Control window by:
• Choosing Tools Display and Control from the Endurance Manager menu bar. By
default, this enables you to manage all components of the server.
• Double-clicking on a server component in the Administration Window. This applies a
filter to the Display and Control window. Accessing commands using this method
displays only the commands that are relevant to the selected component. For example,
double-clicking on an Ethernet connection displays only Ethernet commands.
A Display and Control window is shown in Figure 4-5 and described in Table 4-8.
Figure 4-5 Display and Control Window