HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

65
Chapter 4 Endurance Manager
Table 4-9 Options Window Parameters
Parameter Description
Time in seconds to automatically
poll for the system status
Specifies the interval to poll and update server state and status
information. The default is 5 seconds. If this field is blank or 0, Endurance
Manager does not perform an automatic update.
Time in seconds to automatically re-
execute Show commands
Specifies the interval to update any open Show command windows. The
default is 3 seconds. If this field is blank or 0, Endurance Manager does
not perform an automatic update.
IOP1
IOP2
Enables you to choose which IOP(s) to poll and update server
information. When running Endurance Manager:
• On the CE, IOP1 and IOP2 are selected by default. This means
that IOP1 is polled first. If IOP1 is available, Endurance
Manager displays the server status as reported by IOP1. If IOP1
is unavailable, Endurance Manager displays the status as
reported by IOP2.
• On an IOP, each IOP polls itself by default. This means that
Endurance Manager displays the server as reported by the local
IOP.
Display Last Mirror Copy Status in a
separate window
Displays the Last Mirror Copy Status window in a separate window when
this option is enabled (check mark is displayed). For Last Mirror Copy
Status window information, refer to Last Mirror Copy Status Window
(page 58).
Display Device Status in a separate
window
Displays the Device Status window in a separate window when this option
is enabled (check mark is displayed). For Device Status window
information, refer to Device Status Window (page 57).
Save On Exit
The Save On Exit check box saves your current selections, including the
position of the dialog boxes on your screen, when you exit the Endurance
Manager.