HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

Chapter 4 Endurance Manager
68
Tools Menu
The Tools menu displays the options described in Table 4-11.
Table 4-11 Tools Menu Options
Option Description
Display and
Control
Opens the Display and Control Window. This dialog box enables you to execute commands to
monitor and manage your server. The Display and Control window is described on page 61.
Configuration
Utility
Starts the Endurance Configuration Utility. Refer to Chapter 6 or the Endurance Configuration
Utility’s online help for information. This option is only available on IOPs.
Endurance
Event Utility
Starts MTCLOG, an MS-DOS based Endurance event viewer that displays events as they
occur. Refer to Chapter 7 for MTCLOG information.
Windows NT
Utilities
Displays a submenu that starts any of the following Windows NT utilities, described in the
Windows NT documentation:
• Control Panel
• Disk Administrator
• Event Viewer
• Explorer
• File Manager
• Notepad
• Performance Monitor
• Registry Editor
Note: Some of these options may not be enabled if you are monitoring a remote server.
Options Displays the Options Window (page 64). This dialog box enables you to set polling and
monitoring parameters for the server.
Save Settings
Now
Saves all Endurance Manager window settings currently in use (including the location of
Endurance Manager window(s) on the screen) as the default. For example, use this option if
you changed Endurance Manager setting or parameters and want to save the new settings as
the default.