HP NetServer AA 6200 Solution Release 3.0 Administrator's Guide

79
Chapter 5 Commands
CE1 or CE2 Commands
The CE1 or CE2 commands perform operations on the CE. Table 5-3 lists the CE1 or CE2
commands.
Note: The only CE operating system command is the CE_O/S Shutdown Command
command, described on page 89.
Table 5-3 CE1 or CE2 Commands
Command Page
CE Disable Auto Boot page 80
CE Disable Auto Synch page 81
CE Disable Operation page 82
CE Enable Auto Boot page 83
CE Enable Auto Synch page 83
CE Enable Operation page 84
CE Remove From Configuration page 85
CE Show Auto Boot page 86
CE Show Auto Synch page 86
CE Show Parameters page 88