HP NetServer AA 6200 Solution Release 3.0 Messages

91
Chapter 5 MtcDgs Messages
IOPn.MtcDgs Status Messages
IOPn.MtcDgs status: Datagram Service protocol version mismatch.
Severity Error
Description The Datagram Service running on the remote IOP is running a different Datagram Service
protocol version. Any received datagrams are discarded.
Action • Check the version of the Datagram Service running on the IOPs.
• If they are not identical, reinstall the HP NetServer AA software.
IOPn.MtcDgs status: Error accessing data in the Registry.
Severity Error
Description MtcDgs could not read the Registry during initialization; therefore, it could not determine
which network adapters to open. Initialization was aborted. As a result, the driver did not load,
and the IOP cannot join the HP NetServer AA server configuration.
Action • Confirm the MtcDgs bindings are correct.
• Use the Network Control Panel application to remove and reinstall MtcDgs.
IOPn.MtcDgs status: Error in NIC bindings.
Severity Error
Description Too many Network Interface Controllers (NICs) are bound to the MtcDgs service. MtcDgs
will use the first five bound adapters.
Action • To correct this condition, modify the bindings in the Network Control Panel application.
You must bind at least one adapter (and not more than five) to MtcDgs. One of the
adapters should be the adapter used by the IL.
• After you modify the bindings, remember to reboot the IOP so the new bindings can take
effect. Refer to Chapter 9 in HP NetServer AA Solution Administrator’s Guide for
information about how to reboot an IOP.