HP NetServer AA 6200 Solution Release 3.0 Messages

151
Chapter 9 MtcFLOP and MtcFLOR Messages
MtcFLOR Status Messages
MtcFLOR status: The Floppy Redirector attempted to create a floppy device, but failed. As a result, that floppy device
will be inaccessible.
Severity Error
Description The floppy device failed initialization. This error usually occurs because the device is not
configured properly.
Action • Using the HP NetServer AA Configuration Utility, check the configuration information
that you supplied for each floppy device.
• Make any necessary corrections. Remember that when you make a change using the HP
NetServer AA Configuration Utility, you must make the same change on both IOPs. (The
IOPs must contain identical configuration files.)
• Because any changes will not take effect until the IOP reboots, schedule an appropriate
time to reboot the affected IOP or the entire server.
MtcFLOR status: The Floppy Redirector received an invalid sync-up response from the Floppy Provider. As a result,
the floppy devices will be inaccessible.
Severity Error
Description An internal error has occurred.
Action • Using the HP NetServer AA Configuration Utility, check the configuration information
that you supplied for each floppy device.
• Make any necessary corrections. Remember that when you make a change using the HP
NetServer AA Configuration Utility, you must make the same change on both IOPs. (The
IOPs must contain identical configuration files.)
• Because any changes will not take effect until the IOP reboots, schedule an appropriate
time to reboot the IOPs.
MtcFLOR status: The registration of MtcFloR with the CE Transport failed.
Severity Error
Description An internal error has occurred.
Action Contact your service provider for assistance.