HP NetServer AA 6200 Solution Release 3.0 Messages

213
Chapter 13 MtcMon Messages
IOPn.MtcMon Status Messages
IOPn.MtcMon status: A CE protocol error was detected on IOPx during a CEy remove or disable operation.
Va r ia b le s x – the ID of the IOP on which a protocol error was detected
y – the ID of the CE that was being removed or disabled when the error was detected
Severity Warning
Description When using the Endurance Manager to issue a request to remove or disable a CE, the Monitor
performs a series of message exchanges between the local IOP and the CE. A protocol error
was detected during this message exchange. This message is usually generated as a result of a
hardware failure that occurred during the message exchange, or a software error.
Related Messages
IOPn.MtcMon status: The CE remove or disable operation failed.
IOPn.MtcMon status: CEx has been removed from service.
IOPn.MtcMon status: IOPx has been removed from service.
Action The CE remove or disable is aborted when this message occurs. The message IOPn.MtcMon
status: The CE remove or disable operation failed
is also generated. It is also
possible that a secondary message occurs that results in removing the CE or an IOP. Report
this message to your service provider.