HP NetServer AA 6200 Solution Release 3.0 Messages

Chapter 13 MtcMon Messages
234
IOPn.MtcMon status: CE synchronization cannot be performed at this time. Windows NT is not fully loaded. The
operation will be retried at a later time.
Severity Warning
Description Because the Windows NT operating system is not completely loaded on the CE,
synchronization cannot be performed.
Hardware/Software This message is generated as a result of a software condition that exists in the CE operating
system.
Action • CE synchronization is retried automatically. If Windows NT has completed loading by
that time, synchronization is performed.
• If the condition persists, synchronization cannot be performed. In this case, contact your
service provider for assistance.
IOPn.MtcMon status: CE synchronization process aborted due to time out.
Severity Error
Description The CE synchronization aborted because the operation timed out. The CE synchronization
timeout is a factor of the memory sizes of the CEs. Synchronization timeouts are typically the
result of a failure of the synchronization slave CE.
Related Messages
IOPn.MtcMon status: The synchronization process has started for CEx.
IOPn.MtcMon status: The synchronization process has failed for CEx.
IOPn.MtcMon status: CEx has been removed from service.
Hardware/Software This message is typically due to a physical failure of the CE synchronization slave CE
specified in the message.
Action • Synchronization is retried automatically. If synchronization cannot be performed after
multiple retries, the slave CE is faulted and must be repaired or replaced.
• Examine the event log of the slave CE to determine why it is not capable of
synchronization.