HP NetServer AA 6200 Solution Release 3.0 Messages

239
Chapter 13 MtcMon Messages
IOPn.MtcMon status: CEx could not be booted because the keyboard boot driver has not registered with the Monitor
on IOPy.
Va r ia b le s x – the ID of the CE that could not be booted
y – the ID of the IOP on which the driver was not registered
Severity Error
Description The CE requested to boot the operating system before the Monitor on the IOP received a
registration call from the Endurance Keyboard/Mouse Provider driver. Because the IOP
keyboard is used to boot the operating system, the keyboard must be available before boot can
be allowed to proceed.
This message is generated if the Windows NT Registry ClientList parameter is not correct for
the Endurance Keyboard/Mouse Provider driver. When the Monitor initializes, it examines the
ClientList parameter in the Windows NT Registry to determine which clients must be loaded
for the IOP to join the Endurance server. The ClientList should contain an Endurance
Keyboard/Mouse Provider driver value of “08”. If it does not, the IOP may join, and this
message is then generated when the CE attempts to boot.
Hardware/Software This error indicates a problem with the Endurance software configuration.
Action • Make sure that the Windows NT Registry ClientList parameter for the Endurance
Keyboard/Mouse Provider driver contains a value of "08". If "08" is not included, reinstall
Endurance server software on the IOP.
• If the condition persists, contact your service provider for assistance.
IOPn.MtcMon status: CEx could not be booted because the number of processors is invalid for the Endurance license
type.
Va r ia b le s x – the ID of the CE that could not be booted
Severity Error
Description The CE could not be booted because the number of processors in the CE is not valid for the
type of Endurance license installed on the server.
Hardware/Software This message is usually generated as a result of t software of hardware configuration error.
Action • Examine the number of processors present in the CE.
• Add or remove processors to be consistent with the Endurance license installed on the
server.
• If you are not certain of the number of processors that are valid for your license, consult
the Endurance documentation or contact your service provider for assistance.