HP NetServer AA 6200 Solution Release 3.0 Messages

Chapter 1 Introduction
28
IOPn.MtcMon status: The CE CPU ID 0xx power-on settings do not match. CE1 CPU
power-on settings = 0xy. CE2 CPU power-on settings = 0xz.
page 274
IOPn.MtcMon status: The CE CPU ID 0xx speeds do not match. CE1 CPU speed = y MHz
CE2 CPU speed = z MHz
page 274
IOPn.MtcMon status: The CE CPU ID 0xx versions are not compatible. CE1 CPU version
information = 0xy. CE2 CPU version information = 0xz.
page 275
IOPn.MtcMon status: The CE CPUx model and/or family types are not compatible. CE1
CPU ID register = 0xy. CE2 CPU ID register = 0xz.
page 275
IOPn.MtcMon status: The CE CPUx stepping IDs do not match. CE1 CPU ID register =
0xy. CE2 CPU ID register = 0xz.
page 276
IOPn.MtcMon status: The CE MIC BIOS revisions are not compatible. CE1 MIC BIOS
revision = x. CE2 MIC BIOS revision = y.
page 276
IOPn.MtcMon status: The CE MIC BIOS setting for PCI parity checking differs between
CEs.
page 277
IOPn.MtcMon status: The CE MIC bus IDs do not match. CE1 MIC bus ID = x. CE2 MIC
bus ID = y.
page 277
IOPn.MtcMon status: The CE MIC FPGA revisions do not match. CE1 MIC FPGA revision
= 0xx. CE2 MIC FPGA revision = 0xy.
page 278
IOPn.MtcMon status: The CE MIC microcode edit levels do not match. CE1 MIC
microcode revision = 0xx. CE2 MIC microcode revision = 0xy.
page 278
IOPn.MtcMon status: The CE MIC microcode revisions are not compatible. CE1 MIC
microcode revision = 0xx. CE2 MIC microcode revision = 0xy.
page 279
IOPn.MtcMon status: The CE MIC module edit levels do not match. CE1 MIC module
revision = 0xx. CE2 MIC module revision = 0xy.
page 279
IOPn.MtcMon status: The CE MIC module revisions do not match. CE1 MIC module
revision = x. CE2 MIC module revision = y.
page 280
IOPn.MtcMon status: The CE MIC PCI base addresses x do not match. CE1 PCI base
address = 0xy. CE2 PCI base address = 0xz.
page 280
IOPn.MtcMon status: The CE MIC PCI device addresses do not match. CE1 PCI address =
0xx. CE2 PCI address = 0xy.
page 281
IOPn.MtcMon status: The CE MIC PCI interrupt assignments do not match. CE1 PCI
interrupt information = 0xx. CE2 PCI interrupt information = 0xy.
page 281
IOPn.MtcMon status: The CE operating system cannot be synchronized. page 282
Table 1-5HP NetServer AA Message Summary – Prefixed Messages (Continued)
Message Page