HP NetServer AA 6200 Solution Release 3.0 Messages

Chapter 2 MIC BIOS Messages
48
Confirm: Changes made to MIC settings have not been saved. Press <Esc> to return to setup; press <Enter> to exit.
Severity Informational
Description A change was made to the MIC identity and was not saved in non-volatile memory. Unless the
change is saved, it has no effect.
Action • Press <Esc> to return to the setup utility to save the change.
• Otherwise, press <Enter> to allow the exit to proceed without saving the change.
Confirm: The selected test mode will run on exit in place of system startup. Press <Esc> to return to setup; press
<Enter> to continue with exit.
Severity Informational
Description A test mode was selected and will run following POST in place of the normal system startup.
Action • Press <Esc> to return to the setup utility and cancel the test mode.
• Otherwise, press <Enter> to continue with the test after exit completes.
HP NetServer AA startup canceled by user
Severity Informational
Description The user pressed the <Esc> key during MIC BIOS initialization to bypass the CE startup
process.
Action No action is required.
Entering server mode. Listening for client test connections. . .
Severity Informational
Description The system is waiting for client test connections on port 1 and port 2.
Action Press Esc to cause the system to stop listening for connections. No other action is required.