HP Netserver AA 6200 Solutions Release Notes v4.0 SP1

Endurance Release Notes for Release 4.0 Service Pack 1 13
Known Limitations
The following sections describe special Release 4.0 considerations, as well as the general and
third-party known limitations that have an impact on the Release 4.0 Endurance server.
Release 4.0 Considerations
CE Driver Signing Policy Considerations
The MtcPrep executable, part of the CE Unattended Installation, sets the Driver Signing Policy
for the CE operating system to Ignore in the Registry, and gives the user no warning notification
about this change.
Once you log in to the CE operating system for the first time and set up an Administrator
password, you can change file signature verification so that you are warned before unsigned
drivers are installed. To do so, follow these steps:
IL Cable
2 singlemode patch
cords (that you obtain)
with SC connectors on
each end
IL singlemode
gigabit network
adapters on
IOP1 to IOP2 via
the patch panel
1. Attach one end of the patch
cord to the IL Ethernet
adapter port on IOP1 and the
other end of the cord to the
patch panel.
2. Attach one end of the patch
cord to the IL Ethernet
adapter port on IOP2 and the
other end of the cord to the
patch panel.
Be sure to connect the adapters
that support the IL and not the
adapters that connect your server
to the network.
Step Action Notes
1
Select Start Settings Control Panel
System Hardware tab
.
Table 7 Long Distance SplitSite Endurance Server Cables
Cable Description Connects Installation Instructions