HP Netserver AA 6200 Solutions Release Notes v4.0 SP1

2 Endurance Release Notes for Release 4.0 Service Pack 1
Additional Documentation on the Customer Support Web Site
Note: This document contains complete and timely information about the product as of
its publication. However, you should consult the HP NetServer AA Solution Web
page at
http://netserver.hp.com/netserver/products/highlights_assured_avail.asp
to obtain the most recent updates to information about the release.
Platform Support and System Requirements
CE Dual Processor Support and CPU Requirement
Release 4.0 requires two processors in each CE, which are necessary for the server to boot. If
your server is configured with only one CPU in either of the CEs, the server will not boot. Also,
use of the
/onecpu switch in the boot.ini file has no effect; even if you set this switch, your
server will boot using both CPUs in the CE.
In addition, all processors in the CEs must be the same model (for example, Pentium
®
III or
Pentium III Xeon
TM
) and speed. As of the initial Release 4.0, Pentium III or Pentium III Xeon
are the only supported CPU types.
HP Netserver AA Solution Administrator’s Guide Online only
HP Netserver AA Solution Installation Guide Online only
HP Netserver AA Solution Messages Online only
Endurance Upgrade/Downgrade Procedures Online only
Glossary Online only and hardcopy in the HP
Netserver AA Solution Adminstrator’s Guide
Table 1 Release 4.0 Documentation
Manual or Document Format