HP Netserver AA Solution Administrator's Guide v4.0 SP1

Commands 5-23

IOP Shutdown Operation

This command removes the specified IOP from the Endurance configuration, shuts down the

IOP, and automatically reboots it. When it reboots, the IOP rejoins the Endurance server

configuration. If you do not want the IOP to rejoin, power it off or use the IOP Disable

command.

Command IOPn Shutdown Operation From IOPx

Console Syntax MTCCONS IOPn Shutdown Operation From IOPx

-disable_safeguard

Note: The -disable_safeguard argument is needed only for the last IOP

online or for the CE boot disk if the CE is running.

Variables n – the ID number of the IOP (1 or 2) to shut down

x – the ID number of the IOP (1 or 2) that issues the shutdown command

Results Check the Windows Event Viewer for a message that indicates that the CE

has been shut down, disabled, or removed from service.