HP Netserver AA Solution Administrator's Guide v4.0 SP1

5-24 HP Netserver AA Solution Administrator’s Guide
IOPn.DatagramService Commands
The IOPn.DatagramService commands control and return statistics for adapters that are bound
to the Endurance Datagram Service (DGS). Adapters are bound to DGS during Endurance
software installation.
Table 5-7 lists the IOPn.DatagramService commands.
IOPn.DatagramService Reset Port Counters
This command sets all MtcDgs port counter statistics (page 5-25) to zero for devices that are
bound to the MtcDgs Service.
Command IOPn.DatagramService Reset Port Counters
Console Syntax MTCCONS IOPn.DatagramService Reset Port Counters
Variables n – the ID number of the IOP (1 or 2)
Results The port counters for all devices bound to the Endurance Datagram Service
are set to zero.
IOPn.DatagramService Show Parameter Values
This command returns the parameter values for the Endurance Datagram Service (DGS) on the
specified IOP.
Command IOPn.DatagramService Show Parameter Values
Console Syntax MTCCONS IOPn.DatagramService Show Parameter Values
Variables
n – the ID number of the IOP (1 or 2)
Table 5-7 IOPn.DatagramService Commands
Command Page
IOPn.DatagramService Reset Port Counters 5-24
IOPn.DatagramService Show Parameter Values 5-24
IOPn.DatagramService Show Port Counters 5-25
IOPn.DatagramService Show Port Information 5-27