HP Netserver AA Solution Administrator's Guide v4.0 SP1

Commands 5-27
IOPn.DatagramService Show Port Information
This command returns port information about devices that are bound to the Endurance
Datagram Service (DGS) on the specified IOP.
Command IOPn.DatagramService Show Port Information
Console Syntax MTCCONS IOPn.DatagramService Show Port Information
Variables n – the ID number of the IOP (1 or 2)
Results
See Also IOPn.Ethernetx Show Port Information
Table 5-10 DatagramService Port Information
Value Meaning
Vendor Description The manufacturer data reported directly from the card.
Typically, this is the vendor name and model number.
Network Binding Name CurrentControlSet\Services\MtcDgs\Linkage Bind value
Current Source Address The current MAC address in use by the card
Permanent Address The permanent MAC address burned on the card