HP Netserver AA Solution Administrator's Guide v4.0 SP1

5-50 HP Netserver AA Solution Administrator’s Guide
IOPn.InputProvider Enable Hotkey
This command enables hotkeys so that they can be used to toggle input devices between the
local IOP and the CEs. By default, using hotkeys is enabled.
Command IOPn.InputProvider Enable Hotkey
Console Syntax MTCCONS IOPn.InputProvider Enable Hotkey
Variables n – the ID number of the IOP (1 or 2)
See Also IOPn.InputProvider Disable Hotkey
IOPn.InputProvider Show Hotkey
IOPn.InputProvider Enable LED Flashing
This command enables the Scroll Lock LED so that it flashes the input device status. By default,
LED flashing is enabled, and the Scroll Lock LED flashes whenever the input devices are
logically connected to the local IOP.
Command IOPn.InputProvider Enable LED Flashing
Console Syntax MTCCONS IOPn.InputProvider Enable LED Flashing
Variables n – the ID number of the IOP (1 or 2)
See Also IOPn.InputProvider Disable LED Flashing
IOPn.InputProvider Show LED Flashing
IOPn.InputProvider Set Arbitration Timeout
This command configures input arbitration for the Endurance server. When arbitration is
enabled, CE input is allowed only from one IOP at a time. During the arbitration timeout, CE
input is allowed from only one IOP (effectively blocking input from the other IOP). At the end
of each arbitration interval, input control is available to switch to the next IOP where mouse
movement or keyboard activity is detected.
By default, arbitration is disabled, allowing either or both tuples to provide input to the
Endurance server.
Command IOPn.InputProvider Set Arbitration Timeout x
Console Syntax MTCCONS IOPn.InputProvider Set Arbitration Timeout x