HP Netserver AA Solution Administrator's Guide v4.0 SP1

Commands 5-65

IOPn.Monitor Commands

The IOPn.Monitor commands perform operations on the monitor. Table 5-27 lists the

IOPn.Monitor commands.

IOPn.Monitor Disable Auto Start

This command disables Auto Start for an IOP. When an IOP reboots, Auto Start allows the

specified IOP to automatically join the Endurance server configuration (after the time specified

by the initialization interval has elapsed), regardless of whether the other IOP is available. If

Auto Start is disabled, the IOP joins the configuration only if the other IOP is present or the

other IOP is faulted or disabled. Auto Start is also affected by the IOPn.Monitor Set

Initialization Interval command. By default, Auto Start is disabled.

Command IOPn.Monitor Disable Auto Start

Console Syntax MTCCONS IOPn.Monitor Disable Auto Start

Variables

n – the ID number of the IOP (1 or 2)