HP Netserver AA Solution Administrator's Guide v4.0 SP1

5-70 HP Netserver AA Solution Administrator’s Guide
IOPn.Monitor Show Initialization Interval
This command displays the initialization interval for the specified IOP. The initialization
interval is the time period in seconds that the IOP waits to initialize with the other IOP before
either or both of the following occur:
• Responding to the CE if Auto Start is true (enabled).
• An event is generated if the other IOP does not become available and if Auto Start is false
(disabled).
By default, Auto Start is disabled and the initialization interval is 120 seconds.
Command IOPn.Monitor Show Initialization Interval
Console Syntax MTCCONS IOPn.Monitor Show Initialization Interval
Variables n – the ID number of the IOP (1 or 2)
Results For an example of the results of this command, refer to IOPn.Monitor Show
Parameters.
See Also IOPn.Monitor Set Initialization Interval
IOPn.Monitor Show Parameters
IOPn.Monitor Show MIC Interconnect Status
This command displays the MIC interconnect status for IOPn, including status information for
all system components visible to IOPn.
Command IOPn.Monitor Show MIC Interconnect Status
Console Syntax MTCCONS IOPn.Monitor Show MIC Interconnect
Variables
n – the ID number of the IOP (1 or 2)