HP Netserver AA Solution Administrator's Guide v4.0 SP1

Configuration Utility 6-3
You can use the icons and buttons in this window to add, remove (delete), and display devices
in your configuration. The icons in this window are described in Table 6-1; the buttons are
described in Table 6-2. For more detailed information about Endurance Configuration Utility
windows and dialog boxes, refer to the utility’s online help.
Warning: The configuration information must be identical on both IOPs.
If you add or remove any hardware devices from your
configuration, you must make the same change on each IOP.
Table 6-1 Endurance Configuration Utility Devices and Icons
Device Description
CD ROM Drives CD-ROMs are non-mirrored and can be either SCSI CD-ROM
drives or IDE CD-ROM drives.
Disk Drives
Mirrored
Non-mirrored
Disk drives are either mirrored or non-mirrored SCSI disk
drives. Mirrored disks are paired, one in each IOP.
You must identify the CE boot disk on the Properties page for
the designated CE disk drive.
Network
Adapters
Network adapters must be Ethernet adapters that are
configured in pairs, one in each IOP.
Tape Drives All tape drives are non-mirrored SCSI tape drives.