HP Netserver AA Solution Administrator's Guide v4.0 SP1

6-6 HP Netserver AA Solution Administrator’s Guide
Using the Endurance Configuration Utility
Using this window, you can:
• Add Devices
• Display Device Properties
• Remove Devices
• Commit Configuration Changes
Warning: The configuration information must be identical on both IOPs,
except for Ethernet addresses. If you add or remove any devices
from your configuration, you must make the change on each
IOP.
Add Devices
To add a hardware device:
Step Action Notes
1 Click on the icon for the device you
want to add.
For example, it might be CD-ROM drives.
2 Click Add.
3 Follow the on-screen instructions. If you need additional information, use the
online help.
4 Complete your configuration changes
following the steps in Commit
Configuration Changes section on page
6-13.