HP Netserver AA Solution Administrator's Guide v4.0 SP1

7-4 HP Netserver AA Solution Administrator’s Guide
In this screen, press Enter to continue with the MIC Setup screen, shown in Figure 7-2.
Figure 7-2 MIC Setup Screen
In the MIC Setup screen, make selections about the parameters described in Table 7-1. When
the screen displays, the first field is highlighted. To select another field, press the up or down
arrows until you highlight the field of choice. To select or change an item, press Enter to cycle
among the possible values. You can make one selection per MIC identity setting. After you have
made and saved your selection, press the Escape key, or select Exit, and press Enter to exit the
Setup program.
Table 7-1 MIC BIOS Setup Window Parameters
Parameter Description
MIC Identity Setting Identifies the role the system plays in an Endurance configuration:
• CE1
• CE2
•IOP1
•IOP2
• Unknown
Save Identity Setting Indicates whether the setting chosen above is changed or saved:
• Modified
•Saved
Note: Be sure you save settings before you exit the program.