HP Netserver AA Solution Administrator's Guide v4.0 SP1

7-6 HP Netserver AA Solution Administrator’s Guide
Once the above parameters are chosen and the MIC identity setting is saved, the server displays
the MIC Setup Confirmation screen, shown in Figure 7-3. Then the server reboots with the new
settings in effect.
Figure 7-3 MIC Setup Confirmation Screen
The MIC BIOS utility tests the parameters you have chosen and displays messages, warnings,
and errors on the local monitor. If a test encounters a fatal error, the BIOS pauses so that you
can view the message. Pressing any key after an error causes the system to reboot.