HP Netserver AA Solution Administrator's Guide v4.0 SP1

Managing Faults 8-3
Diagnosing Faults
You can use any of the methods in Table 8-1 to diagnose a fault.
If you are monitoring an Endurance server using Remote Endurance Manager, you have access
only to Endurance Manager and Windows Event Viewer information.
Table 8-1 Diagnosing Faults
Method Description Refer to . . .
Endurance Manager Use the Administration Window and Device Status Window
to determine if a component, including the MIC, is active or
online.
Chapter 4 for
Endurance
Manager
information
MIC status lights Displays the power and connection status for the MICs in
your Endurance server.
Appendix A for
MIC status light
information
Windows Event
Viewer
Displays all events reported to the Windows operating
system, including Endurance events. Use this log to
diagnose potential faults.
HP Netserver
AA Solution
Messages online
manual for event
information
Endurance Event
Log Utility
Displays Endurance events as they are being logged. The
Endurance Event Log (MTCLOG) is an MS-DOS
application that displays only Endurance events as they
occur.
Chapter 7 for
MTCLOG
information
HP Netserver
AA Solution
Messages online
manual for event
information