HP Netserver AA Solution Administrator's Guide v4.0 SP1

Endurance Server Maintenance 9-11
Replacing an Interconnect Fiber Cable on an Online System
Use the following procedure to replace an interconnect fiber cable on an online system.
Caution: Before proceeding, make sure you are properly grounded using,
for instance, a wrist strap with an attached alligator clip that is
connected to an appropriate ground.
Step Action Notes
1 Make sure a component at one end of
the fiber to be replaced is offline or
disabled.
2 Disconnect the existing fiber from the
Endurance system.
3 Connect the replacement fiber to the
Endurance system.
4 Enable the ESI path if it is faulted. Use Endurance Manager for this step.
5 Make the components at each end of
the ESI path online or active.