HP Netserver AA Solution Administrator's Guide v4.0 SP1

9-12 HP Netserver AA Solution Administrator’s Guide
Replace an Interconnect Fiber Cable on an Offline System
Use the following procedure to replace an interconnect fiber cable on an offline system.
Caution: Before proceeding, make sure you are properly grounded using,
for instance, a wrist strap with an attached alligator clip that is
connected to an appropriate ground.
Step Action Notes
1 Shut down and power off the
Endurance system.
See Shutting Down the Endurance Server on
page 9-9.
2 Disconnect the existing fiber from the
Endurance system.
3 Connect the replacement fiber to the
Endurance system.
4 Power on and boot the Endurance
system.
5 Enable the ESI path if it is faulted. Use the Endurance Manager for this step.
6 Make the components at each end of
the ESI path online or active.