HP Netserver AA Solution Administrator's Guide v4.0 SP1

Endurance Server Maintenance 9-21
6 Reboot the new IOP into Operational
Endurance I/O Processor Mode.
The public Ethernets may require additional
considerations. Refer to the procedures on page
9-24 for information.
7 Use Endurance Manager to ensure
that:
• Any components affected by this
procedure are active or online.
Reenable any faulted or disabled
components (page 9-31).
• The IOP joins the server.
• The IL transitions to active.
• The IOPx.Ethernet transitions to
standby, and all other cables
transition to online.
• A mirror copy is either started or
pending for all mirrored devices.
• After all mirror copies are complete,
check the message log for any
messages that occurred after the
IOP was replaced and that begin
with or .
Step Action Notes