HP Netserver AA Solution Administrator's Guide v4.0 SP1

Endurance Server Maintenance 9-25
Updating an Ethernet Driver
On an IOP, after you update the third-party Ethernet driver for a redirected Ethernet adapter and
before you restart Windows, you must recommit the configuration, using the Endurance
Configuration Utility. The Endurance Configuration Utility rewrites the Network Address
parameter for the Ethernet adapters in the Registry. To accomplish this:
Step Action Notes
1 Open the Endurance Configuration
Utility
.
Be sure this is on the IOP where you updated
the driver.
2 Double-click on the Ethernet adapter
that you updated.
This displays the Properties for the adapter.
3 Select OK.
4 Select Commit.
5 Respond to all prompts so that the
Commit is applied.
6 Following the procedure described in
Rebooting an IOP, reboot the IOP.
This causes the new driver to take effect.