HP Netserver AA Solution Administrator's Guide v4.0 SP1

9-26 HP Netserver AA Solution Administrator’s Guide
Adding a Windows Service Pack
For the CE Operating System
To add a Windows Service Pack to the CE operating system:
For an IOP
Determine in advance if you want to install the Service Pack on both IOPs simultaneously. If
so, on both IOPs, perform step 1 and step 2 in the following table, and then reboot the entire
server.
If you do not want to install the Service Pack on both IOPs simultaneously, perform the entire
procedure in the table on one IOP, and then repeat the entire procedure on the other IOP.
To add a Windows Service Pack to an IOP:
Step Action Notes
1 Schedule an appropriate time to reboot
the CE operating system.
2 Install Windows Service Pack software.
3 When prompted, reboot Windows.
Step Action Notes
1 Install Windows Service Pack software.
2
When prompted, do
not reboot
Windows.
3
Reboot the IOP as described on
page
9-3
.
If you reboot the IOPs while the CEs are
running, a mirror copy will occur.