HP Netserver AA Solution Administrator's Guide v4.0 SP1

MIC Specifications and LEDs A-3
MIC LEDs
Each MIC has LEDs which indicate the status of the firmware and of the local and remote fiber
connections. Figure A-1 is a representation of the MIC LEDs.
Figure A-1 MIC LEDs
Table A-3 describes the firmware LED.
Table A-3 Firmware LED
State Indicates
Off No power, or MIC is not working.
Rapid Red Flash (5-10 seconds)
Rate of 1/10th second
MIC is running the self-test which occurs after reset.
Solid Red MIC has failed to initialize or pass the self-test.
Flashing Red/
Rate of 1 second
MIC has not established connections with any other component
and may be powered down without affecting server availability.
Flashing Green MIC is loaded and running and has established a connection to at
least one other Endurance component.
ware status
Firm
Local connection fiber status
Remote connection fiber status