HP Netserver AA Solution Administrator's Guide v4.0 SP1

Endurance Overview 2-21
Keyboard/Pointer States
The keyboard and pointer states are:
Other Endurance Component States
The CD-ROM and tape drive states for the Endurance are:
Table 2-10 Keyboard/Pointer States
State Description
Online Both the keyboard and pointer are available to the Endurance
server.
Faulted The keyboard or pointer is not available to the entire Endurance
server configuration. In some cases (for example, failed keyboard
or pointer), the input device is not available to either the IOP or CE.
In other cases (when the keyboard or pointer are not identical), the
keyboard or pointer is unavailable to the CE, but remains available
locally (at the IOP).
Table 2-11 States of Other Endurance Components
State Description
Online Indicates that a device is available for use by the CE operating system.
Offline Indicates that a device is not available for use by the CE operating system, but the
device is not necessarily failed. Possible reasons for offline include:
• For some devices, a transitional state that precedes online.
• The device was disabled using Endurance Manager.
• The device was not detected by Endurance software. Possible reasons include the
device was powered off or was improperly defined using the Endurance
Configuration Utility.
Additionally, some devices may be set to offline to temporarily block their access until
the device’s state can be properly identified.
Faulted Indicates a device failure has been detected. If the error is transient, you can return the
device to service by enabling the device (using Endurance Manager), and rebooting
the IOP. If the error is not transient, you need to replace the device.