HP Netserver AA Solution Administrator's Guide v4.0 SP1

4-14 HP Netserver AA Solution Administrator’s Guide
Last Mirror Copy Status Window
The Last Mirror Copy Status window displays mirror copy status information for the Endurance
server. The Last Mirror Copy Status window is shown in Figure 4-4, and is described in Table
4-6. To control how this window displays, use the Endurance Manager options described in
Table 4-7.
Because this window displays the last mirror copy status as seen by a particular IOP, it is
possible for the IOPs to return last mirror copy status reports that appear somewhat different.
However, any IOP that is actively serving the CEs (in other words, one that is neither offline,
faulted, nor disabled) provides complete and current mirror copy status reports.
Figure 4-4 Last Mirror Copy Status Window
Table 4-6 Last Mirror Copy Status Window Contents
Option Description
Disk Identifies the SCSI disks associated with a mirror set (for example, CE Disk0).
Note: Endurance disk names, such as Disk0 and Disk1, do not necessarily
match the names of Windows similarly named disks, as seen when
viewed with Disk Administrator window.
Status Contains one of the following:
Done Mirror copy completed successfully.
Failed Mirror copy did not complete.
Note: A mirror copy may not complete for a variety
of reasons, such as an IOP may have been
taken down, a disk may have failed or been
disabled, or a disk may have encountered a
bad spot.