HP Netserver AA Solution Administrator's Guide v4.0 SP1

Endurance Manager 4-15
Table 4-7 Endurance Manager Options Affecting the Last Mirror Copy Status Window
Pending Mirror copy is waiting to start.
Note: A mirror copy target disk is offline while a
mirror copy is pending. It transitions to online
as the mirror copy begins.
Started Mirror copy is in progress.
Unable A disk was located, but it cannot participate in a
mirror copy. For example, it may be faulted or it
may have been explicitly disabled.
Unknown State of the disk cannot be determined. For
example, if an IOP or one or more members of a
mirror set are not found, it is not possible to
determine whether a mirror copy is needed.
Current Mirrored disks contain identical information; no
copy is required.
IOP1
IOP2
Identifies the direction of a mirror copy by:
S Indicates which IOP is the source of the mirror
copy.
D Indicates which IOP is the destination of the mirror
copy.
% Indicates the percentage of data that has been copied.
Copied Contains the total number of bytes of data that has been copied.
Total Contains the total number of bytes of data (disk size) that must be copied.
Option Description
View Mirror Copy Status
Configures whether the Last Mirror Copy Status window is
displayed. The Last Mirror Copy Status window is displayed if a
checkmark is shown by this menu option.
Tools Options, Display Last
Mirror Copy Status in a separate
window option
Configures whether the Last Mirror Copy Status Window is
embedded in the Endurance Manager window or displayed as an
independent Last Mirror Copy status window (page 4-14).
Table 4-6 Last Mirror Copy Status Window Contents (Continued)
Option Description